Etneo storage systems are based on reliable and powerful machines, that did their story in the first stand alone pv installations before the FIT era. The two brands used for our proposals are Schneider electric and Studer, the power electronics inside these inverter is synonymous of reliability and quality as well as longevity.

Here are some characteristics of the products:

  • All Schneider solutions are able to handle peak power for nearly double the nominal power, for periods of time from 1 to 30 minutes, this allows the inverter to work optimally in the presence of engines, water pumps, devices that have very high consumption when switched on.
  • The machines Conext SW and XW+ can be put in parallel in both single-phase and three-phase and work with other devices via Modbus connection, which makes them manageable simultaneously from a single control panel or by the web.
  • All Studer solutions are equipped with the certificated “Boost system” thanks to which draw from the mains only the portion of missing energy to power the loads; every inverter allows passage of current up to 50A: for example, the inverter 2,6kW may allow a transfer of power up to 11kW and therefore can be installed on existing photovoltaic systems rated at 6kWp.
  • All the control boxes for retrofit are pre-wired and complete with all accessories including monitoring system, it must be added only an external differential depending on the type of PV system exists.